Our robot-assisted systems for surface processing of door handles, knobs, door fittings and locking systems give you every opportunity to bring your production to a new level.

Reduce unit costs, increase your OEE and improve the quality of your products.

The different grinding and polishing processes of door handles all takes place in a robot cell.

The robot's precise path control ensures the highest surface qualities.

• Flexible and modular solution
• Increase in OEE
• Optimization of surface finish
• Competitive advantage through high flexibility

Flexibility is not only important when changing workpieces, but also when adapting to new processes. This modular expandability secures your investment for the future.

All modules can be integrated into the robotic cell now or later - all from a single source, and can consist of the following:

• Removal of sprues
• Milling · Drilling · Deburring
• Grinding · Belt grinding · Fine grinding · SpeedFinish
• Superfinishing
• Polishing · Lapping
• Cleaning · Marking
• Measuring · Inspection

In the first step, rough unevenness is removed.

The fine grit of the belt and the precise control of the robot produces a unique feel of the door handle.

The uniformity of the pressure produces a consistent, perfect finish on every part.

A diverse product range equates to smaller batches. For this reason, special attention must be paid to fast changeover. If desired, this can also be done fully autonomously.

Economical integration of new workpieces through software-supported path planning as well as process and cycle time simulation. This is possible for all common robot types.

See the machining of door handles in action.

Watch on YouTube ...